Slickote Dry Lube 200
Apply iaw Solid Film Lubricant, AS5272 nc Ty 2/ Mil-L-46010E Ty 2
Slickote Dry Lube200 is a heat cured, resin bonded solid film lubricant coating to be applied iaw AS5272 nc Ty 2/ Mil-L-46010E type 2.
To reduce wear and prevent galling, corrosion and seizure of metals.
Where conventional lubricants are difficult to apply or retain, or where other lubricants may be easily
contaminated with dirt and dust.
For sliding motion applications such as plain and spherical bearings, flap tracks, hinges, threads and cam
Where temperature ranges are from -68 deg C to 204 deg C, intermittent exposure to 260 deg C
When mechanisms are operated at infrequent intervals or are lubricated for life.
Where long term corrosion protection is required under static conditions.
Where solvent resistance is required
Where extremely heavy loaded lubrication is required including initial start up of heavy loaded mechanisms
designed for fluid lubrication.
As a touch up to worn surfaces previously coated with solid film lubrication
Metal Preparation: All surfaces must be thoroughly cleaned, degreased, free of rust, oxides or other surface
impurities. Recommended pretreatments:
Aluminum – Anodize and seal iaw Mil-A-8625, type I, II, or III , Class 1 (non-dyed)
Steel – Abrasive clean (180 to 220 grit aluminum oxide) and phosphate coat iaw DOD-P-16232
type M or Z, Class 3.
Stainless Steel - Abrasive clean (120 grit aluminum oxide) and Passivate iaw AMS QQ-P-35.
Titanium – Abrasive Clean (180 to 220 grit aluminum oxide) and alkaline anodize
1) Mix well, in mechanical paint shaker
2) Concentrate only: Reduce with SlicKote Reducer 2:1 (or 50/50 mix of Ethanol & Methyl Ethyl
3) Apply with spray gun, brushing or dipping: to .008 mm to .013 mm coating thickness (.0002 to
4) Air dry for 30 minutes
5) Heat cure, 400 deg F for 1 hour.
Wt/Gal 11.3 Lbs/gal
App.temp: Ambient (< 90 degF)
Cure: 400 deg F for 1 Hour
Shelf Life: 1 year from date of manufacture
Storage: Store in closed container
Store between 32 deg F and 75 deg F
VOC: 500 g/l, (4.2 Lbs/ Gal)
Solids: Concentrate: 38 to 42% or Ready to Apply
Do not use in food processing or handling equipment or surfaces with food contact. Use only in well ventilated